Discap

All times are UTC - 5 hours




Post new topic Reply to topic  [ 54 posts ]  Go to page 1, 2, 3, 4  Next
Author Message
 Post subject: Blatnick To-Do List
PostPosted: Wed Jul 05, 2017 1:52 pm 
Offline
WTF ??!!!
User avatar

Posts: 13759
Location: Ballston Lake, NY
We're going to keep a running list of things that anyone can do as far as course maintenance/improvements/etc.
If anyone wants to tackle a task, please feel free to do so and then respond here.

Make benches for tees 13 white, 14 and 18 blue.
Hole 4 - New fairway for the blue tee needs brush dragged away. PLEASE drag off to the left. Back fill the tee with nearby dirt from the berm to the left.
Hole 12 - High weeds approaching the pin can be cut down/pulled out. Go all the way back to the bridge.
Hole 13 - New fairway needs brush piles dragged further to the left. Back fill the tees with wood chip by 12
Hole 14 - Back fill the tees with nearby dirt. Back right corner of blue tee needs log cut and dirt.
Hole 17 - Drag downed trees & brush off the fairway or out to the pocket we cut RIGHT of the blue tee(green flags). Needs stumps removed or cut flush.
Hole 18 - Back fill the tees with nearby dirt.

_________________
I buy all my plastic at MSt !!


Top
 Profile  
 
 Post subject: Re: Blatnick To-Do List
PostPosted: Thu Jul 06, 2017 7:54 am 
Offline
Rookie

Posts: 13
Location: Glens Falls, NY
Went out yesterday for a round. I don't live in the area so I am not around during weekends but I can get some tools from home and spend a few hours next week clearing brush after work. I'll get to the signs on 7 as well if they aren't done by then. I ran into 2 guys yesterday that got confused trying to play the old 7 setup.


Top
 Profile  
 
 Post subject: Re: Blatnick To-Do List
PostPosted: Thu Jul 06, 2017 12:38 pm 
Offline
WTF ??!!!
User avatar

Posts: 13759
Location: Ballston Lake, NY
rch723 wrote:
Went out yesterday for a round. I don't live in the area so I am not around during weekends but I can get some tools from home and spend a few hours next week clearing brush after work. I'll get to the signs on 7 as well if they aren't done by then. I ran into 2 guys yesterday that got confused trying to play the old 7 setup.


Thanks Reid!!
You can focus on hole 13, it's the only hole left with downed trees/brush.
Signs on 7 are not done yet so have at it.

I'll keep this updated next week when we get out and cut more.

_________________
I buy all my plastic at MSt !!


Top
 Profile  
 
 Post subject: Re: Blatnick To-Do List
PostPosted: Thu Jul 06, 2017 2:18 pm 
Offline
WTF ??!!!
User avatar

Posts: 13759
Location: Ballston Lake, NY
Thanks to Mike Schwartz for tackling all the brush on 17!!

We'll be back at it next week, focusing on 13 & 14

_________________
I buy all my plastic at MSt !!


Top
 Profile  
 
 Post subject: Re: Blatnick To-Do List
PostPosted: Fri Jul 07, 2017 2:03 pm 
Offline
Newbie

Posts: 7
Signs on 7 are done


Top
 Profile  
 
 Post subject: Re: Blatnick To-Do List
PostPosted: Sat Jul 08, 2017 7:57 am 
Offline
WTF ??!!!
User avatar

Posts: 13759
Location: Ballston Lake, NY
Duda wrote:
Signs on 7 are done

Thanks!

_________________
I buy all my plastic at MSt !!


Top
 Profile  
 
 Post subject: Re: Blatnick To-Do List
PostPosted: Mon Jul 10, 2017 7:37 pm 
Offline
Rookie

Posts: 13
Location: Glens Falls, NY
Went down today for about an hour and worked on 14. All I had were a few rakes; I think a weed wacker and snippers would have been more effective. Started at the tee with the biggest debris and worked my way up then raked trying to clear out the little stuff. Made it to the pine tree.

Not sure if it looks much different than when I started but the big logs are cleared out.

From the tee
Image

Image


Top
 Profile  
 
 Post subject: Re: Blatnick To-Do List
PostPosted: Mon Jul 10, 2017 7:40 pm 
Offline
Rookie

Posts: 13
Location: Glens Falls, NY
Those pics are way bigger than I meant to put up


Top
 Profile  
 
 Post subject: Re: Blatnick To-Do List
PostPosted: Tue Jul 11, 2017 8:50 am 
Offline
WTF ??!!!
User avatar

Posts: 13759
Location: Ballston Lake, NY
LOL at least they are clear !!!

Thanks for all the work !!

I'll be out in the next few days to get cutting more on 14.

_________________
I buy all my plastic at MSt !!


Top
 Profile  
 
 Post subject: Re: Blatnick To-Do List
PostPosted: Thu Jul 13, 2017 1:08 pm 
Offline
WTF ??!!!
User avatar

Posts: 13759
Location: Ballston Lake, NY
I cut some more brush on 14 today. Up the left side from the tee and some more on the right side over the hill.
Also added more ribbons to trees to define the fairway boundaries. Eventually, most all of that brush to the right of the trail will be cut down.

Please drag it off the fairway or add to the pile out near the basket.

_________________
I buy all my plastic at MSt !!


Top
 Profile  
 
 Post subject: Re: Blatnick To-Do List
PostPosted: Fri Jul 14, 2017 1:11 pm 
Offline
Newbie

Posts: 7
Path to tee #1 is done.

Did some clean up on 17 as well.


Last edited by Duda on Fri Jul 14, 2017 2:34 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Blatnick To-Do List
PostPosted: Fri Jul 14, 2017 2:04 pm 
Offline
WTF ??!!!
User avatar

Posts: 13759
Location: Ballston Lake, NY
Duda wrote:
Path to tee #1 is done.

Thanks !!

_________________
I buy all my plastic at MSt !!


Top
 Profile  
 
 Post subject: Re: Blatnick To-Do List
PostPosted: Sun Jul 16, 2017 7:07 am 
Offline
WTF ??!!!
User avatar

Posts: 13759
Location: Ballston Lake, NY
Fresh cutting on hole 13 !!

_________________
I buy all my plastic at MSt !!


Top
 Profile  
 
 Post subject: Re: Blatnick To-Do List
PostPosted: Mon Jul 17, 2017 6:43 am 
Offline
Newbie

Posts: 7
No need to take those pallets from cps. I can make a bridge using materials from work.


Top
 Profile  
 
 Post subject: Re: Blatnick To-Do List
PostPosted: Mon Jul 17, 2017 7:53 am 
Offline
WTF ??!!!
User avatar

Posts: 13759
Location: Ballston Lake, NY
Duda wrote:
No need to take those pallets from cps. I can make a bridge using materials from work.
thanks!!
:clap:

_________________
I buy all my plastic at MSt !!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 54 posts ]  Go to page 1, 2, 3, 4  Next

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group